This is the O.S. Max 30VG EB Modified RC Monster Truck Engine with Slide Valve Carburetor and Rear Exhaust. Hand assembled and balanced and blueprinted to guarantee precision parts fit, longest engine life and best possible performance.
***This engine does not have the O.S. Max 2 Year Warranty.*** For all set-up questions and engine service contact- EB MODS Ed Bridges 572 E. Main St. Larksville, PA 18651 Shop Phone: (570) 719-1012 Fax: (570) 719-1007
FEATURES: Lightened and silicone filled crankshaft improves fuel delivery and while maintaining counterbalance weight Crankshaft is balanced using bob weights for a .2 IPS level or better Crankshaft face is modified to improve aerodynamics, fuel atomizing and balance Lightened and strengthened connecting rod for reduced rotating and reciprocating weight Lightened and modified piston for reduced reciprocating weight and improved fuel flow Cylinder sleeve is ported to increase port velocity while maintaining proper port angles Piston and sleeve is matched to increase cylinder sealing area and improved power and engine life
INCLUDES: O.S. Max 30VG RC Vehicle Engine with 21E slide valve carburetor, #8 glow plug, carb gasket and instruction manual, Super 203 air cleaner with two foam elements (OSMG2360), exhaust gasket and illustrated instruction manual
REQUIRES: Fuel: Car blend fuel with 30% nitromethane content
SPECS: Specs such as bore, stroke, RPM and power output are not provided, contact EB MODS for more info.
Weight w/o Muffler: 12.5oz (355g) Distance Between Mounting Holes Same Side: 0.83" (21mm) Distance Between Mounting Holes Opposite Side: 1.4" (37mm) Distance Between Mounting Holes Diagonal: 2.3" (59mm) Height Bottom of Mounting Ears to Top of Cylinder Head: 3.8" (97.7mm) Width of Mounting Ears: 1.8" (45mm) Width of Crankcase Below Mounting Ears: 1.2" (30.8mm) Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm) Distance from Center of Engine to Front Bearing: 1.7" (44mm) Distance from Center of Engine to Backplate: 0.85" (21.6mm)
COMMENTS: To use this engine on the Duratrax Warhead use OFNG0098 Clutch Nut.
|